FILTER PLEATED 16inx25inx2in MERV 8

2000.021625 MFG #: 5251104790
  • Depth: 2 in, 2in
  • Dimensions: 15-1/2 in W x 24-1/2 in H x 1-3/4 in D, 24-1/2 in H x 15-1/2 in W x 1-3/4 in D
  • Flow Rate: 1389 cfm, 1400 cfm
  • IsInactive: false
  • MERV: 8
  • Nominal Pleat: 10 Plates/Linear-Ft, 16.4 Pleats/Ft
  • Width: 16 in, 16in

Self-supported pleated filters - the Key Pleat MERV 8, standard-capacity. 

Seven-strap Die Cut - A seven-strap die cut is located on the air-leaving side of the Key Pleat MERV 8 providing additional strength and durability to each filter. 

100% Adhesive Application Ensures Filter Strength - The inside of the die cut frame is completely coated with adhesive to ensure a solid bond at all points of contact with the media pack.

Water Repellant Adhesive - The sealant used to bond the frame to the media pack is highly water-repellent. That means that the filters maintain structural integrity even when wet; no delaminating, excessive buckling, or collapsing.

Uniformity of Pleats - The uniformity of pleat height and spacing ensures optimal performance throughout the useful life of every Key Pleat MERV 8 filter. The combination of the self-supporting media and the innovative, automated construction also means low resistance to airflow and cost-effective, environmentally responsible use of energy resources.

  • Temperature Rating
  • Final Resistance
  • Type
  • Width
  • Depth
  • Dimensions
  • Nominal Pleat
  • Flow Rate
  • Height
  • Media
  • Domestic/Import
  • Weight
  • Frame Material
  • MERV
  • IsInactive
150 deg F
1 in WG
Standard Capacity
15-1/2 in W x 24-1/2 in H x 1-3/4 in D
16.4 Pleats/Ft
1400 cfm
Non-Woven Synthetic
0.45 lb
Beverage Board