The Premier HVAC/R Distributor for Licensed Contractors!
BALL VALVE WELDED 1-5/8in SWT SUPERIOR
- End Style: Compression
- Nominal Size: 1-5/8 in
- Port Type: Full
- Pressure Rating: 700 psig
- Series: WA Series
- Temperature Rating: -40 to 325 deg F
SUPERIOR® Integra-Seal® WA Series Ball Valve, 1-5/8 in, Compression, Forged Brass, Full Port, Domestic
SUPERIOR® Integra-Seal® Ball Valve, Series: WA Series, 1-5/8 in Nominal, Compression, 700 psig, -40 to 325 deg F, Full Port, 1-1/2 in Orifice, Polished Brass/Carbon Steel Ball, 9.13 in Inlet to Outlet Length, 2.73 in Top to Inlet Center, Forged Brass Body, PTFE Seal, Gasket, Domestic
A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon® ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8 through 3-1/8 in. These ball valves are non-directional flow valves and may be installed in any position.
- Series
- Nominal Size
- End Style
- Pressure Rating
- Temperature Rating
- Port Type
- Orifice Size
- Ball Material
- Inlet to Outlet Length
- Top to Inlet Center
- Body Material
- Softgoods Material
- Domestic/Import
- IsInactive
SUPERIOR® Integra-Seal® WA Series Ball Valve, 1-5/8 in, Compression, Forged Brass, Full Port, Domestic
SUPERIOR® Integra-Seal® Ball Valve, Series: WA Series, 1-5/8 in Nominal, Compression, 700 psig, -40 to 325 deg F, Full Port, 1-1/2 in Orifice, Polished Brass/Carbon Steel Ball, 9.13 in Inlet to Outlet Length, 2.73 in Top to Inlet Center, Forged Brass Body, PTFE Seal, Gasket, Domestic
A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon® ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8 through 3-1/8 in. These ball valves are non-directional flow valves and may be installed in any position.