The Premier HVAC/R Distributor for Licensed Contractors!
ISOLATOR SWT 1-1/4in ROTATING FLANGE
- Ball Material: HCP Brass
- Body Material: Brass
- Color/Finish: Brass
- Dimensions: 3-7/16 in
- End Style: C x Rotating Flange
- Fitting/Connector Type: Valve
- Inlet Port: 1-1/4 in sweat
- Inlet to Outlet Length: 3-7/16 in
- IsInactive: false
- Port Type: Full
- Top to Inlet Center: 2-15/16 in
- Type: Valve
Webstone The Isolator® Clean Brass" Ball Valve, Series: 5140, 1-1/4 in Nominal, Compression x Rotating Flange, 600 psi WOG, 100 deg F, Full Port, Media: Water/Glycol Mixture, Wing Style T-Handle Actuator, HCP Brass Ball, 3-7/16 in Inlet to Outlet Length, 2-15/16 in Top to Inlet Center, Brass Body, Brass Trim, PTFE Seat, Stem Seal, Brass, Import
Designed for residential, commercial or industrial use with water or glycol mixture. This approved Webstone valve is actuated by a blowout proof stem and features an adjustable packing gland. Flanges features a conical inlet to minimize turbulence. This rotating flange is secured by a sung-off snap-ring that provides greater control over positioning during installation. Solder joint temperature rating are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have low pressure/temperature limits. Do not sliver braze or over heat valves when soldering. Bonus handle included with standard brass products only.
- Nominal Size
- Domestic/Import
- End Connection
- Method of Manufacture
- Inlet to Outlet Length
- Inlet Port
- Port Type
- Seal Material
- Size
- Series
- Ball Material
- Body Material
- Application
- Specifications
- Trim Material
- Color/Finish
- Top to Inlet Center
- Handle Material
- Seat Material
- Softgoods Material
- Temperature Rating
- Actuator Type
- Fitting/Connector Type
- End Style
- Pressure Rating
- Media
- Dimensions
- Type
- Material
- Stem Material
- IsInactive