-
Ball Material:
HCP Brass
-
Body Material:
Brass
-
Color/Finish:
Brass
-
Dimensions:
3-1/2 in
-
End Style:
C x Rotating Flange
-
Fitting/Connector Type:
Valve
-
Inlet Port:
1-1/4 in sweat
-
Inlet to Outlet Length:
3-1/2 in
-
Port Type:
Full
-
Top to Inlet Center:
3-1/6 in
-
Type:
Valve with hose drain
Webstone The Isolator® Ball Valve, Series: 5141, 1-1/4 in Nominal, Compression x Rotating Flange, 600 psig WOG, 100 deg F, Full Port, Media: Water/Glycol Mixture, Lever Handle Actuator, HCP Brass Ball, 3-1/2 in Inlet to Outlet Length, 3-1/6 in Top to
Designed for residential, commercial or industrial use with water or a glycol mixture. This approved Webstone valve is actuated by a blowout proof stem and features an adjustable packing gland. Flange features a conical inlet to minimize turbulence. The rotating flange is secured by a snug-fit snap-ring that provides greater control over positioning during installation. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.